Daily maintenance of EROWA fixture

With the continuous improvement of today's industrial level, we often use erowa fixtures because it is widely used. No matter what we use, we must use it correctly to extend its service life. So when we use the Eowa fixture, we must use it correctly, and read the instruction manual carefully before using it.

Pofi is a professional EROWA fixture supplier, providing high-quality products and competitive prices, welcome to contact us, today I will introduce you to the daily maintenance methods of EROWA fixtures, if you have any questions, please feel free to contact us.

1. First put the four nail corners of the fixture on the marble surface, and manually detect whether the fixture is uneven.

2. When the fixture is not flat, tapping the fixture with your finger will show a loud noise, indicating that the fixture is not flat and needs to be calibrated. If there is no sound, it means that the fixture is flat.

3. If it is not flat, you need to grind and calibrate. Place the jig on the grind platform, and then grind the four nail corners in a figure eight shape until they are flat.

4. When the marble is polished to see normal, we need to check the standard data.

5. Place the fixture on the marble platform and use an altimeter to check whether the fixture data is within the scope of public service.

6. It can be used within the range, if it is out of range, it cannot be used. Choose to replace the nail angle.