What is Compatible System Equipment

The earliest EMC issue was lightning strike (lightning electromagnetic pulse, or LEMP) on ships and buildings. Lightning rods or lightning conductors began to appear in the mid-18th century. With the advent of widespread electricity generation and power supply lines from the late 19th century on, problems also arose with equipment short-circuit failure affecting the power supply, and with local fire and shock hazard when the power line was struck by lightning. Power stations were provided with output circuit breakers. Buildings and appliances would soon be provided with input fuses, and later in the 20th century miniature circuit breakers (MCB) would come into use.

Hitachi's total lineup consists of six ink types as of October 2018—five ethanol-based ink types and one non-OSP applicable ketone-based ink type. The ethanol-based ink types include 3112K for general-purpose applications, 3127K and 3131K which are highly adhesive on polypropylene (PP) and polyethylene (PE), 3111K for returnable containers and enabling erasure of printing using an alkaline solution, and 3128FA invisible ink that fluoresces under UV and is used for applications such as product quality control. The lineup also includes 4136K, a non-OSP applicable ketone-based ink that is highly adhesive on PP and PE and is marketed mainly to the food industry as an alcohol-resistant ink.

Electrostatic discharge testing is typically performed with a piezo spark generator called an "ESD pistol". Higher energy pulses, such as lightning or nuclear EMP simulations, can require a large current clamp or a large antenna which completely surrounds the DUT. Some antennas are so large that they are located outdoors, and care must be taken not to cause an EMP hazard to the surrounding environment.

Transient or EMP signals are used to test the immunity of the DUT against powerline disturbances including surges, lightning strikes and switching noise. In motor vehicles, similar tests are performed on battery and signal lines. The transient pulse may be generated digitally and passed through a broadband pulse amplifier, or applied directly to the transducer from a specialised pulse generator.

The basic arrangement of noise emitter or source, coupling path and victim, receptor or sink is shown in the figure below. Source and victim are usually electronic hardware devices, though the source may be a natural phenomenon such as a lightning strike, electrostatic discharge (ESD) or, in one famous case, the Big Bang at the origin of the Universe.

Oil-free scroll compressors are increasingly demanded by industries requiring oil-free operation, low vibration, and low noise. Major users include food companies and research facilities. Users have also recently been demanding more compact models to flexibly accommodate line layout changes and distributed air compressor installation for energy-saving purposes.

EMC ensures the correct operation, in the same electromagnetic environment, of different equipment items which use or respond to electromagnetic phenomena, and the avoidance of any interference. Another way of saying this is that EMC is the control of EMI so that unwanted effects are prevented.

From the late 1970s, the popularity of modern digital circuitry rapidly grew. As the technology developed, with ever-faster switching speeds (increasing emissions) and lower circuit voltages (increasing susceptibility), EMC increasingly became a source of concern. Many more nations became aware of EMC as a growing problem and issued directives to the manufacturers of digital electronic equipment, which set out the essential manufacturer requirements before their equipment could be marketed or sold. Organizations in individual nations, across Europe and worldwide, were set up to maintain these directives and associated standards. In 1979, the American FCC published a regulation that required the electromagnetic emissions of all "digital devices" to be below certain limits. This regulatory environment led to a sharp growth in the EMC industry supplying specialist devices and equipment, analysis and design software, and testing and certification services. Low-voltage digital circuits, especially CMOS transistors, became more susceptible to ESD damage as they were miniaturised and, despite the development of on-chip hardening techniques, a new ESD regulatory regime had to be developed.