POFI EDM TOOLING SYSTEM CO.,LTD
+86-0769 85071992
You are here: Home » News » Industry News » Notes for accessories grinding

Notes for accessories grinding

Views:4     Author:Site Editor     Publish Time: 2021-05-20      Origin:Site

Grinding is a process often carried out after long-term use of hardware mold parts. The abrasive particles embedded on the grind tool will finish the surface of the workpiece during the grinding process. During the relative movement between the grind tool and the workpiece, the rust and damaged parts on the surface of the hardware mold parts will be gradually ground. Flat and become smoother.

After the grinding process, the service life of the hardware mold parts will become longer, and the processing effect will be more significant. So what are the matters needing attention when grinding high-quality hardware mold parts?


1. Pay attention to the order of using abrasives

Even high-quality hardware mold parts need to use abrasives in a certain order when grinding, from large particles to small particles, from coarse abrasives to fine abrasives. And in order to avoid the "relief" phenomenon.


2. Pay attention to the correct use of abrasives

In order to avoid scratches on the surface of hardware mold parts, only abrasives of the same size can be used in the same grinding tool, and the surface of hardware mold parts must be carefully cleaned before changing the size each time to avoid residual large-grained abrasives in the next process. Damaged parts during the process.


3. Pay attention to the correct operation of grinding of different particle sizes

When an efficient and professional metal mold parts grinder is grinding precision mold parts, when switching to the next grit grinding process, the grinding direction will be about 30 degrees with the last grinding direction, because it is not easy. Scars appear. If there are scars during the conversion operation, a comprehensive repair should be carried out to remove the pits.

grinding process

ABOUT

CONTACT
  +86 0769 85071992
  info@pofi-workholding.com

  Sales Manager 1:Gavin Liang
  +86 13798887652
  gavin@pofisystem.cn

  Sales Manager 2:Iris Wen
  +86 18129919853
  Iris@pofisystem.cn

  Headquarter:  Flat/RM A5,9/F Silvercorp INT'L Tower 707-713, Nathan Rd Mongkok KLN HongKong, China
Factory Add:Room 202,Building 7th, Weifeng Road, Dongcheng, Dongguan, Guangdong, China.
MESSAGE

POFI EDM TOOLING SYSTEM CO.,LTD   All rights reserved     Technical Support:Molan Network